FABRICS / MATERIAL OVERVIEW
Outdoor acrylic fabric
RECOMBU specializes exclusively in acrylic fabric for projects such as boat covers, shade systems and outdoor seating. Use this guide to define requirements before choosing and approving a physical swatch.
5-year fabric warranty
View texture at full size (opens in a new tab)
01 / APPLICATIONS
Match the fabric to the construction.
A boat cover needs a layout that sheds water; an awning has to work with its frame and tension; a seat cover must suit how the cushions are used and cleaned. Start with the finished piece and work back to the fabric requirements.
02 / TECHNICAL DATA SHEET
What to check on the TDS.
Use the technical data sheet (TDS) for the exact fabric reference, color and finish. Check its revision date and make sure any relevant test reports describe the same fabric and finish. Record the test method, units and result together.
| Specification | What to verify |
|---|---|
| Construction | Confirm fiber composition, weave and finish. Check how the fabric drapes, folds and feeds through your sewing equipment. |
| Usable width | Check width excluding selvages against the widest panel. Allow for seams, hems, bindings and pattern alignment in the cutting layout. |
| Weight | Compare mass per unit area in the same units, such as g/m² or oz/yd². Use the sample to judge handling as well as the stated weight. |
| Outdoor exposure | Confirm lightfastness data and any documented water performance for the selected fabric. Water repellency and resistance to water pressure describe different properties. |
| Mechanical performance | Check tear and tensile strength where panels are tensioned or secured; check abrasion data for seating and other high-contact surfaces. |
| Color and roll supply | Confirm the physical color reference, roll length and required lot consistency. Check how much usable fabric is available before finalizing the cut plan. |
| Assembly and care | Check any restrictions on sewing, bonding, cleaning agents and heat. Test the intended seam or attachment and the planned cleaning method on a sample first. |
For marine projects, distinguish the documented exposure limits of the fabric from the corrosion resistance of fittings, fasteners and hardware. Check both against the finished assembly’s requirements.
Read the performance guide03 / SAMPLE APPROVAL
Check it before you cut.
- Review color and surface. browse fabric swatches, then compare physical swatches with adjacent materials in daylight and under the lighting where the fabric will be installed.
- Make a construction sample. Sew a short panel with the intended thread and seam, or wrap the fabric around the actual frame, foam or corner detail.
- Keep an approved reference. Record the fabric reference and color, retain a signed-off swatch and compare incoming rolls with it before cutting.
04 / CARE & WARRANTY
Looking after the fabric.
Cleaning and storage
Follow the care instructions for your fabric and finish. Remove loose debris before cleaning and allow the fabric to dry before folding or storing. Check the instructions before using bleach, a pressure washer, heat or a finish treatment.
5-year fabric warranty
RECOMBU offers a five-year fabric warranty. Review the applicable terms for the selected fabric before ordering and keep the fabric reference and purchase record with your project documents.
05 / FABRIC RESOURCES
Keep the selection and care guides handy.
Use the guides when reviewing samples, checking incoming fabric and planning routine care.